This is a HEAVY DUTY adapter to fit standard UK & European IBC Containers which normally have a 2" BORE, which is a 60mm Butress/Coarse Thread (measured thread edge to thread edge). More details on IBC fitment are below

It converts the S60 buttress IBC outlet thread (after the valve) to a more useful Heavy Duty Polypropylene Bib Tap.

The tap has a smooth easy-action On/Off mechanism and come complete with Snap-On fittings for the attachment of hose pipe (if required) in 3 sizes...1/2" (standard garden hose), 3/4" and 1".

WILL IT FIT MY TANK?

These adapters will fit most standard UK and European IBC containers where the buttress thread is a coarse S60X6 thread. An S60X6 Buttress thread measures 60 mm across from thread edge to thread edge and has a 6 mm pitch (distance between the threads).

If your tank buttress is not an S60X6 (about 20% are not) you can purchase a Buttress Thread Converter which will convert the thread to the S60X6 you will require. If you know the measurements of your buttress thread take a look at the “Buttress Thread Converters” Category which you can access from the home page. If you are not sure send us a message and we will try to point you in the right direction.

QUICK TIP

When selecting the correct size of hose tail don't measure the OD (outer diameter) of your hose, you need the ID (inner diameter) that corresponds with the hose tail OD. For example, if your hose has an internal diameter of 25 mm (1") you need to select the 25 mm (1") hose tail.